Dr. Pervaiz Ahmed

2022: [1] P. Ahmad, A. Khalid, M.U. Khandaker, F. Rehman, M.I. Khan, H. Ali, N. Muhammad, M.S. Kiyani, A. Sulieman, M.A. Rauf Khan, Z. Razzaq, A. Khan, S. Haq, Y. Saeed, M.I. Irshad, The antibacterial and antioxidant efficacy and neutron sensing potency of 10B enriched hexagonal boron nitride nanoparticles, Materials Science in Semiconductor Processing, 141 (2022) 106419. (I.F = 4.644) [2] A. Khalid, P. Ahmad, A. Khan, M.U. Khandaker, I. Kebaili, M.M. Alam, I.U. Din, S. Muhammad, Z. Razzaq, I.U. Rehman, H.A. Abbasi, D. Hayat, Cytotoxic and photocatalytic studies of hexagonal boron nitride nanotubes: a potential candidate for wastewater and air treatment, Rsc Adv, 12 (2022) 6592-6600. (I.F = 4.036) [3] A. Khalid, P. Ahmad, A. Khan, S. Muhammad, M.U. Khandaker, M.M. Alam, M. Asim, I.U. Din, R.G. Chaudhary, D. Kumar, R. Sharma, M.R.I. Faruque, T.B. Emran, Effect of Cu Doping on ZnO Nanoparticles as a Photocatalyst for the Removal of Organic Wastewater, Bioinorganic Chemistry and Applications, 2022 (2022) 9459886. (I.F = 4.724) [4] A. Khalid, P. Ahmad, S. Muhammad, A. Khan, M.U. Khandaker, M.M. Alam, M. Asim, I.U. Din, J. Iqbal, I.U. Rehman, Z. Razzaq, S. Pandian, R. Sharma, T.B. Emran, M.I. Sayyed, S. Aldawood, A. Sulieman, Synthesis of Boron-Doped Zinc Oxide Nanosheets by Using Phyllanthus Emblica Leaf Extract: A Sustainable Environmental Applications, Frontiers in Chemistry, 10 (2022). (I.F = 5.545) [5] M. Habib, P. Ahmad, F. Akram, I. Kebaili, A. Rahman, I.U. Din, M. Javid Iqbal, M.-H. Kim, S. Lee, M. Uddin Khandaker, H. Goo Yeo, A. Karoui, T.K. Song, High and temperature-insensitive piezoelectric performance in the lead-free Sm-doped BiFeO3–BaTiO3 ceramics with high Curie temperature, Ceramics International, 48 (2022) 26608-26617. (I.F = 5.532) [6] M.I. Irshad, P. Ahmad, A. Khalid, M.M. Alam, N. Sobahi, I.U. Din, R. Nazir, A.I. Alharthi, F. Rehman, A. Yar, Y.A. Haleem, A.G. Wattoo, M.B. Tahir, Evaluation of structural, magnetic and concentration dependent texture variations of electrodeposited cobalt nanowires, Materials Science in Semiconductor Processing, 152 (2022) 107042. (I.F = 4.644) [7] M. Riaz, M. Altaf, P. Ahmad, M.U. Khandaker, H. Osman, E.M. Eed, Y. Shakir, Biogenic Synthesis of Ag Nanoparticles of 18.27 nm by Zanthozylum armatum and Determination of Biological Potentials, Molecules, 27 (2022) 1166. (I.F = 4.927) [8] M. Riaz, A. Suleman, P. Ahmad, M.U. Khandaker, A. Alqahtani, D.A. Bradley, M.Q. Khan, Biogenic Synthesis of AgNPs Using Aqueous Bark Extract of Aesculus indica for Antioxidant and Antimicrobial Applications, Crystals, 12 (2022) 252. (I.F = 2.670) [9] M. Habib, F. Akram, P. Ahmad, F.F. Al-Harbi, I. Ud Din, Q. Iqbal, T. Ahmed, S.A. Khan, A. Hussain, T.-K. Song, M.-H. Kim, S. Lee, Donor multiple effects on the ferroelectric and piezoelectric performance of lead-free BiFeO3-BaTiO3 ceramics, Materials Letters, 315 (2022) 131950. (I.F = 3.574) [10] M. Habib, F. Akram, P. Ahmad, I. Kebaili, A. Rahman, I.U. Din, M.J. Iqbal, A. Zeb, M.U. Khandaker, A. Karoui, M.-H. Kim, T.K. Song, Ultrahigh piezoelectric strain in lead-free BiFeO3-BaTiO3 ceramics at elevated temperature, Journal of Alloys and Compounds, 919 (2022) 165744.. (I.F = 6.371) [11] M. Hafeez, S. Afyaz, A. Khalid, P. Ahmad, M.U. Khandaker, M.U.K. Sahibzada, I. Ahmad, J. Khan, F.A. Alhumaydhi, T.B. Emran, A.M. Idris, Synthesis of cobalt and sulphur doped titanium dioxide photocatalysts for environmental applications, Journal of King Saud University - Science, 34 (2022) 102028. (I.F = 3.829) [12] S.U. Din, S.H. Kiani, S. Haq, P. Ahmad, M.U. Khandaker, M.R.I. Faruque, A.M. Idris, M.I. Sayyed, Bio-Synthesized Tin Oxide Nanoparticles: Structural, Optical, and Biological Studies, Crystals, 12 (2022) 614. (I.F = 2.670) [13] M. Habib, F. Akram, A. Rahman, P. Ahmad, M.J. Iqbal, Q. Liu, A. Zeb, D. Zhang, Defects dipoles control strategy for temperature-insensitive piezoelectricity in the lead-free BiFeO3-BaTiO3 ceramics, Materials Chemistry and Physics, 287 (2022) 126326. (I.F = 4.778) [14] F. Akram, A. Zeb, M. Habib, A. Ullah, P. Ahmad, S.J. Milne, A. Karoui, N. Ali, A. Kumar, S. Lee, C.W. Ahn, Piezoelectric performance of the binary K1/2Bi1/2TiO3–LiTaO3 relaxor-ferroelectric ceramics, Mater Chem Phys, 279 (2022) 125764. (I.F = 4.778) [15] Z.U. Rehman, M. Nawaz, H. Ullah, P. Ahmad, M.U. Khandaker, A.M. Idris, S. Haq, A. Sulieman, Structural and In Situ X-ray Diffraction Study of Hydrogenation of CaxMg1−xNi2 (0 ≤ x ≤ 1), Crystals, 12 (2022) 47. (I.F = 2.670) [16] S.U. Din, H. Iqbal, S. Haq, P. Ahmad, M.U. Khandaker, H.O. Elansary, F.F. Al-Harbi, S.A.M. Abdelmohsen, T.K.Z. El-Abedin, Investigation of the Biological Applications of Biosynthesized Nickel Oxide Nanoparticles Mediated by Buxus wallichiana Extract, Crystals, 12 (2022) 146. (I.F = 2.670) [17] N. Muhammad, Z. Sarfraz, M.S. Zafar, S. Liaqat, A. Rahim, P. Ahmad, A. Alsubaie, A.S.A. Almalki, M.U. Khandaker, Characterization of various acrylate based artificial teeth for denture fabrication, Journal of Materials Science: Materials in Medicine, 33 (2022) 17. (I.F = 4.727) [18] F. Rehman, A. Dahshan, H.A. Yakout, M. Shariq, P. Ahmad, Y. Saeed, Tuning the optical properties through bandgap engineering in Si-doped YAuPb: ab initio study, Journal of Computational Electronics, 21 (2022) 119-127. (I.F = 1.983) [19] Y.S. Itas, A.B. Suleiman, C.E. Ndikilar, A. Lawal, R. Razali, M.U. Khandaker, P. Ahmad, N. Tamam, A. Sulieman, The Exchange-Correlation Effects on the Electronic Bands of Hybrid Armchair Single-Walled Carbon Boron Nitride Nanostructure, Crystals, 12 (2022) 394. (I.F = 2.670) [20] N. Ahmed, R. Mahmood, Z.A. Umar, U. Liaqat, M.A. ul Haq, R. Ahmed, P. Ahmad, S.R.A. Raza, M.A. Baig, Near room temperature, SMT and visible photo-response in pulsed laser deposited VO2 (M1) thin films, Physica B: Condensed Matter, 635 (2022) 413841. (I.F = 2.988) [21] Y.S. Itas, A.B. Suleiman, C.E. Ndikilar, A. Lawal, R. Razali, I.I. Idowu, M.U. Khandaker, P. Ahmad, N. Tamam, A. Sulieman, M.R.I. Faruque, Computational Studies of the Excitonic and Optical Properties of Armchair SWCNT and SWBNNT for Optoelectronics Applications, Crystals, 12 (2022) 870. (I.F = 2.670) [22] M. Hafeez, A. Ghazal, J. Khan, P. Ahmad, M.U. Khandaker, H. Osman, S. Alamri, Eucalyptus globulus Extract-Assisted Fabrication of Copper Oxide/Zinc Oxide Nanocomposite for Photocatalytic Applications, Crystals, 12 (2022) 1153. (I.F = 2.670) [23] M.A. Dilbraiz, M. Nawaz, M. Imtiaz, P. Ahmad, S. Haq, Z.U. Rehman, H. Ullah, M.U. Khandaker, N. Tamam, A. Sulieman, M.A. Bajaber, Synthesis of One-Dimensional Titanium Oxide Nanowires for Polyvinylidene Fluoride Membrane Optimization, Crystals, 12 (2022) 1164. (I.F = 2.670) 2021: [1] P. Ahmad, M.I. Khan, M.H. Akhtar, G. Muhammad, J. Iqbal, A. Rahim, N. Muhammad, Single-step synthesis of magnesium-iron borates composite; an efficient electrocatalyst for dopamine detection, Microchemical Journal, 160 (2021) 105679. (I.F = 5.304) [2] P. Ahmad, M.U. Khandaker, F. Rehman, N. Muhammad, M.R.I. Faruque, Z. Ullah, M.A.R. Khan, G. Khan, M.I. Khan, H. Ali, S. Haq, Y. Iqbal, K. Alzimami, L. Jambi, D.A. Bradley, Facile Synthesis of High-Quality Nano-Size 10B-Enriched Fibers of Hexagonal Boron Nitride, Crystals 11 (2021) 222. (I.F = 2.670) [3] A. Khalid, P. Ahmad, A.I. Alharthi, S. Muhammad, M.U. Khandaker, M.R. Iqbal Faruque, I.U. Din, M.A. Alotaibi, Unmodified Titanium Dioxide Nanoparticles as a Potential Contrast Agent in Photon Emission Computed Tomography, Crystals, 11 (2021) 171. (I.F = 2.670) [4] A. Khalid, P. Ahmad, A.I. Alharthi, S. Muhammad, M.U. Khandaker, M. Rehman, M.R.I. Faruque, I.U. Din, M.A. Alotaibi, K. Alzimami, D.A. Bradley, Structural, Optical and Antibacterial Efficacy of Pure and Zinc-Doped Copper Oxide against Pathogenic Bacteria, Nanomaterials, 11 (2021) 451. (I.F = 5.719) [5] K.U. Rehman, M. Zubair, A. Hassan, M.I. Khan, I. Ahmad, P. Ahmad, H. Ali, T. Ali, M. Haris, Defect-mediated photoluminescence enhancement in ZnO/ITO via MeV Cu++ ion irradiation, Appl Radiat Isotopes, 169 (2021) 109461. (I.F = 1.787) [6] F. Rehman, J.-B. Li, P. Ahmed, M.S. Khan, Y. Saeed, A. khan, M. Zubair, Dielectric relaxation and conduction behaviors of Aurivillius Na0.5Bi4.5Ti4O15 ceramics with Na doping, Rare Metals, 40 (2021) 1247-1254. (I.F = 6.318) [7] S. Haq, P. Ahmad, M.U. Khandaker, M.R.I. Faruque, W. Rehman, M. Waseem, S.U. Din, Antibacterial, antioxidant and physicochemical investigations of tin dioxide nanoparticles synthesized via microemulsion method, Materials Research Express, 8 (2021) 035013. ( I.F = 2.025) [8] S.A. Abbasi, M. Rafique, T.M. Khan, A. Khan, N. Ahmad, M.R.I. Faruque, M.U. Khandaker, P. Ahmad, A. Saboor, Chemical Analysis of Thermoluminescent Colorless Topaz Crystal Using Laser-Induced Breakdown Spectroscopy, Minerals, 11 (2021) 367. ( I.F = 2.818) [9] A. Khalid, P. Ahmad, A.I. Alharth, S. Muhammad, M.U. Khandaker, M.R.I. Faruque, I.U. Din, M.A. Alotaibi, A practical method for incorporation of Fe (III) in Titania matrix for photocatalytic applications, Materials Research Express, 8 (2021) 045006. ( I.F = 2.025) [10] A.A. Mir, F.V. Çelebi, M. Rafique, M.R.I. Faruque, M.U. Khandaker, K.J. Kearfott, P. Ahmad, Anomaly Classification for Earthquake Prediction in Radon Time Series Data Using Stacking and Automatic Anomaly Indication Function, Pure and Applied Geophysics, 178 (2021) 1593-1607. ( I.F = 2.641) [11] H. Ali, M. Imtiaz Khan, R. Ud Din, M. Zubair, I. Mahmood, P. Ahmad, G.-Q. Ge, Coherent control of magneto-optical Faraday rotation at terahertz frequencies in graphene-based metasurfaces via electromagnetically induced transparency, Physica Scripta, 96 (2021) 095101. ( I.F = 3.081) [12] A. Khalid, P. Ahmad, A.I. Alharthi, S. Muhammad, M.U. Khandaker, M.R.I. Faruque, I.U. Din, M.A. Alotaibi, A. Khan, Synergistic effects of Cu-doped ZnO nanoantibiotic against Gram-positive bacterial strains, PLOS ONE, 16 (2021) e0251082. ( I.F = 3.752) [13] Z. Razzaq, A. Khalid, P. Ahmad, M. Farooq, M.U. Khandaker, A.A.M. Sulieman, I.U. Rehman, S. Shakeel, A. Khan, Photocatalytic and Antibacterial Potency of Titanium Dioxide Nanoparticles: A Cost-Effective and Environmentally Friendly Media for Treatment of Air and Wastewater, Catalysts, 11 (2021) 709. ( I.F = 4.501) [14] A. Khalid, P. Ahmad, A.I. Alharthi, S. Muhammad, M.U. Khandaker, M.R.I. Faruque, A. Khan, I.U. Din, M.A. Alotaibi, K. Alzimami, A.A. Alfuraih, D.A. Bradley, Enhanced Optical and Antibacterial Activity of Hydrothermally Synthesized Cobalt-Doped Zinc Oxide Cylindrical Microcrystals, Materials, 14 (2021) 3223. ( I.F = 3.748) [15] Y.S. Itas, C.E. Ndikilar, T. Zangina, H.Y. Hafeez, A.A. Safana, M.U. Khandaker, P. Ahmad, I. Abdullahi, B.K. Olawumi, M.A. Babaji, H. Osman, S. Alamri, Synthesis of Thermally Stable h-BN-CNT Hetero-Structures via Microwave Heating of Ethylene under Nickel, Iron, and Silver Catalysts, Crystals, 11 (2021) 1097. (I.F = 2.670) [16] S. Haq, A.W. Raja, S.U. Rehman, A. Mezni, M. Ben Ali, A. Hedfi, M.I. Shahzad, W. Rehman, N. Shahzad, M. Waseem, P. Ahmad, Phytogenic Synthesis and Characterization of NiO-ZnO Nanocomposite for the Photodegradation of Brilliant Green and 4-Nitrophenol, Journal of Chemistry, 2021 (2021) 3475036. (I.F = 3.241) [17] A. Ahmad, S.A. Abbasi, M. Hafeez, T.M. Khan, M. Rafique, N. Ahmed, P. Ahmad, M.R.I. Faruque, M.U. Khandaker, M. Javed, Detection and Quantification of Precious Elements in Astrophyllite Mineral by Optical Spectroscopy, Materials, 14 (2021) 6277. ( I.F = 3.748) [18] S. Haq, H. Afsar, I.U. Din, P. Ahmad, M.U. Khandaker, H. Osman, S. Alamri, M.I. Shahzad, N. Shahzad, W. Rehman, M. Waseem, Enhanced Photocatalytic Activity of Ficus Elastica Mediated Zinc Oxide-Zirconium Dioxide Nanocatalyst at Elevated Calcination Temperature: Physicochemical Study, Catalysts, 11 (2021) 1481. ( I.F = 4.501) [19] M.I. Khan, M. Zubair, N. Bibi, F. Aziz, A. Mateen, H. Ali, P. Ahmad, Y. Khan, M.K. Tufail, A. Hassan, Effect of Magnesium Doping on Voltage Decay of Nickel-Rich Cathode Materials, ChemistrySelect, 6 (2021) 13301-13308. ( I.F = 2.307) [20] M.A. Alotaibi, I.U. Din, A.I. Alharthi, P. Ahmad, A. Naeem, I.A. ElSayed, G. Centi, Synthesis, Characterization, and Magnetic Behavior of Cobalt-Ferrite Nanoparticles under Variant Temperature Conditions, Physics of Solid State+, 63 (2021) 519-524. ( I.F = 0.895) 2020: [1] P. Ahmad, M.U. Khandaker, S. Jamil, F. Rehman, N. Muhammad, Z. Ullah, M.A. Rauf Khan, G. Khan, M.A. Alotaibi, A.I. Alharthi, I.U. Din, F. Hussain, M.I. Khan, H. Ali, Dual role of Magnesium as a catalyst and precursor with enriched boron in the synthesis of Magnesium diboride nanoparticles, Ceramics International, 46 (2020) 26809-26812. (I.F = 5.532) [2] P. Ahmad, M.U. Khandaker, N. Muhammad, F. Rehman, Z. Ullah, G. Khan, M.I. Khan, S. Haq, H. Ali, A. Khan, Y. Saeed, M.I. Irshad, Synthesis of enriched boron nitride nanocrystals: A potential element for biomedical applications, Appl Radiat Isotopes, 166 (2020) 109404. (I.F = 1.787) [3] F. Saeed, N. Muhammad, A.S. Khan, F. Sharif, A. Rahim, P. Ahmad, M. Irfan, Prosthodontics dental materials: From conventional to unconventional, Materials Science and Engineering: C, 106 (2020) 110167. (I.F = 8.457) [4] M. Zubair, R. Hazem, I. Ahmad, M.I. Khan, T.-k. Zhao, H. Ali, T. Ali, M. Arshad, F. Rehman, P. Ahmad, M. Izerrouken, The effects of 5 MeV carbon ion irradiation on micro-fine grain graphite, Radiation Physics and Chemistry, 166 (2020) 108512. ( I.F = 2.776) [5] S.K. Hussain Shah, J. Iqbal, P. Ahmad, M.U. Khandaker, S. Haq, M. Naeem, Laser induced breakdown spectroscopy methods and applications: A comprehensive review, Radiation Physics and Chemistry, 170 (2020) 108666. ( I.F = 2.776) [6] S. Haq, W. Rehman, M. Waseem, A. Shah, A.R. Khan, M.U. Rehman, P. Ahmad, B. Khan, G. Ali, Green synthesis and characterization of tin dioxide nanoparticles for photocatalytic and antimicrobial studies, Materials Research Express, 7 (2020) 025012. ( I.F = 2.025) [7] F. Rehman, J.-B. Li, P. Ahmad, Y. Saeed, H.-B. Jin, Dielectric relaxation and electrical properties of Na0.5Bi4La0.5Ti4O15 electroceramics, Journal of Electroceramics, 44 (2020) 147-153. ( I.F = 1.814) [8] M.A. Khan, H. Mahmood, M.S. Khan, T. Iqbal, P. Ahmad, M. Shafique, M. Naeem, Microplasma-assisted synthesis of CuO nanostructures for catalytic degradation of organic dyes under solar irradiation, Journal of Solid State Electrochemistry, 24 (2020) 1123-1132. ( I.F = 2.747) [9] F. Rehman, J.-B. Li, Y. Saeed, P. Ahmad, Dielectric behaviors and electrical properties of Gd-doped Aurivillius KBi4Ti4O15 ceramics, Journal of Materials Science: Materials in Electronics, 31 (2020) 14674-14680. ( I.F = 2.779) [10] T. Iqbal, A.u. Rehman, M.A. Khan, M. Shafique, P. Ahmad, H. Mahmood, M. Naeem, J. Iqbal, Copper oxide nanosheets prepared by facile microplasma electrochemical technique with photocatalytic and bactericidal activities, Journal of Materials Science: Materials in Electronics, 31 (2020) 16649-16660. ( I.F = 2.779) [11] A. Ahmad, M. Hafeez, S.A. Abbasi, T.M. Khan, M.R.I. Faruque, M.U. Khandaker, P. Ahmad, M. Rafique, N. Haleem, Compositional Analysis of Chalcopyrite Using Calibration-Free Laser-Induced Breakdown Spectroscopy, Applied Sciences, 10 (2020) 6848. ( I.F = 2.838) [12] H. Ali, M.I. Khan, M. Zubair, P. Ahmad, M.U. Khandaker, T. Ali, F. Khan, Control over spectral hole burning via spontaneously generated coherence and Kerr non-linearity, Optik, 224 (2020) 165558. ( I.F = 2.840) [13] S. Shoukat, S. Haq, W. Rehman, M. Waseem, M. Hafeez, S.U. Din, A. Zain ul, P. Ahmad, M.U. Rehman, A. Shah, B. Khan, Remediation of Chromium (VI) and Rhodamine 6G via Mixed Phase Nickel-Zinc Nanocomposite: Synthesis and Characterization, Journal of Inorganic and Organometallic Polymers and Materials, 31 (2021) 1565-1575. ( I.F = 3.518) [14] M. Shafique, T. Iqbal, M.A. Khan, M. Naeem, I. Ahmed, P. Ahmad, H. Mahmood, Structural, Optical, Electrical, and Photocatalytic Properties of Nickel Cobaltite (NiCo2O4) Nanocomposite Fabricated by a Facile Microplasma Electrochemical Process, Journal of Electronic Materials, 50 (2021) 629-639. (I.F = 2.047) [15] A. Khan, D. Shabir, P. Ahmad, M.U. Khandaker, M.R.I. Faruque, I.U. Din, Biosynthesis and antibacterial activity of MgO-NPs produced from Camellia-sinensis leaves extract, Materials Research Express, 8 (2020) 015402.. ( I.F = 2.025) 2019: [1] P. Ahmad, M.U. Khandaker, N. Muhammad, G. Khan, F. Rehman, A.S. Khan, Z. Ullah, A. Khan, H. Ali, S.M. Ahmed, M.A. Rauf Khan, J. Iqbal, A.A. Khan, M.I. Irshad, Fabrication of hexagonal boron nitride quantum dots via a facile bottom-up technique, Ceramics International, 45 (2019) 22765-22768. (I.F = 5.532) [2] J. Iqbal, N. Muhammad, A. Rahim, A.S. Khan, Z. Ullah, G. Gonfa, P. Ahmad, COSMO-RS predictions, hydrogen bond basicity values and experimental evaluation of amino acid-based ionic liquids for lignocellulosic biomass dissolution, Journal of Molecular Liquids, 273 (2019) 215-221. (I.F = 6.633) [3] F. Rehman, J.-B. Li, I. Ahmad, H.-B. Jin, P. Ahmad, Y. Saeed, M. Shafiq, H. Ali, M.I. Khan, T. Ali, Dielectric relaxation and electrical properties of Bi2.5Nd0.5Nb1.5Fe0.5O9 ceramics, Materials Chemistry and Physics, 226 (2019) 100-105. (I.F = 4.778) [4] I.U. Din, M.S. Shaharun, A. Naeem, S. Tasleem, P. Ahmad, Revalorization of CO2 for methanol production via ZnO promoted carbon nanofibers based Cu-ZrO2 catalytic hydrogenation, Journal of Energy Chemistry, 39 (2019) 68-76. (I.F = 13.599) [5] Z. Ullah, Z. Man, A.S. Khan, N. Muhammad, H. Mahmood, O. Ben Ghanem, P. Ahmad, M.-U. Hassan Shah, R. Mamoon Ur, M. Raheel, Extraction of valuable chemicals from sustainable rice husk waste using ultrasonic assisted ionic liquids technology, Journal of Cleaner Production, 220 (2019) 620-629. (I.F = 11.072) [6] S.M. Ahmed, S.N. Kazi, G. Khan, N. Akram, M. Dahari, M.N.M. Zubir, P. Ahmad, T. Zaharinie, Experimental investigation on drag reduction of flowing crop suspensions of the pulp fibers in circular pipe heat exchanger, Particulate Science and Technology, 38 (2020) 443-453. (I.F = 2.628) [7] M.I. Khan, T. Ali, H. Ali, M. Zubair, I. Ahmad, M. Shafiq, P. Ahmad, F. Rehman, Y. Saeed, Control of the Faraday rotation via electromagnetically induced transparency medium and graphene metasurfaces, Journal of Optics, 21 (2019) 105401. (I.F = 2.077) 2018: [1] P. Ahmad, M.U. Khandaker, N. Muhammad, I. Ahmad, M.A. Rauf Khan, A.A. Khan, G. Khan, A.S. Khan, Z. Ullah, F. Rehman, S.M. Ahmed, H. Ali, M.A. Rehman, M. Gulzar, J. Iqbal, S.T. Shah, S. Ahmed, M. Shafiq, Decomposition-adsorption-deposition: An effective and novel technique for synthesis of hexagonal boron nitride microsheets, Materials Science in Semiconductor Processing 88 (2018) 161-166. (I.F = 4.644) [2] P. Ahmad, M.U. Khandaker, N. Muhammad, F. Rehman, G. Khan, A.S. Khan, Z. Ullah, M.A. Rehman, S. Ahmed, M. Gulzar, I.U. Din, S.M. Ahmed, H. Ali, N. Arshid, Magnesium diboride (MgB2): An effective and novel precursor for the synthesis of vertically aligned BNNTs, Materials Research Bulletin, 98 (2018) 235-239. (I.F = 5.600) [3] A.S. Khan, Z. Man, M.A. Bustam, C.F. Kait, A. Nasrullah, Z. Ullah, A. Sarwono, P. Ahamd, N. Muhammad, Dicationic ionic liquids as sustainable approach for direct conversion of cellulose to levulinic acid, Journal of Cleaner Production, 170 (2018) 591-600. (I.F = 11.072) [4] B. Iqbal, Z. Sarfaraz, N. Muhammad, P. Ahmad, J. Iqbal, Z.U.H. Khan, G. Gonfa, F. Iqbal, A. Jamal, A. Rahim, Ionic liquid as a potential solvent for preparation of collagen-alginate-hydroxyapatite beads as bone filler, Journal of Biomaterials Science, Polymer Edition, 29 (2018) 1168-1184. (I.F = 3.682). [5] Z. Ullah, M.A. Bustam, Z. Man, A.S. Khan, A. Sarwono, N. Muhammad, M. Farooq, S.N. Shah, P. Ahmad, S. Haider, Phosphonium-based hydrophobic ionic liquids with fluorous anions for biodiesel production from waste cooking oil, International Journal of Environmental Science and Technology, 16 (2019) 1269-1276. (I.F = 3.519). [6] S.M. Ahmed, S.N. Kazi, G. Khan, R. Sadri, M. Dahari, M.N.M. Zubir, M. Sayuti, P. Ahmad, R. Ibrahim, Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger, Heat and Mass Transfer, 54 (2018) 875-882. (I.F = 2.325) [7] S.M. Ahmed, S.N. Kazi, G. Khan, M.N.M. Zubir, M. Dahari, S. Ibrahim, A. Talip, M. Sofian, P. Ahmad, Z.Z. Chowdhury, Toward improved heat dissipation of the turbulent regime over backward-facing step for the AL2O3-water nanofluids: An experimental approach, Thermal Science, 23 (2019) 1779-1789. (I.F = 1.971) [8] G. Khan, W.J. Basirun, A.B.B.M. Badry, S.N. Kazi, P. Ahmad, S.M. Ahmed, G.M. Khan, Corrosion Inhibition Performance and Adsorption Mechanism of Novel Quinazoline Schiff Base on Low Alloy Steel in HCl Media, International Journal of Electrochemical Science, 13 (2018) 12420-12436. (I.F = 1.541) [9] M. Gulzar, K. Mahmood, R. Zahid, A. Alabdulkarem, H. Masjuki, M. Kalam, M. Varman, N. Zulkifli, P. Ahmad, M. Malik, The effect of particle size on the dispersion and wear protection ability of MoS2 particles in polyalphaolefin and trimethylolpropane ester, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (2018) 987-998. (I.F = 1.818). 2017: [1] P. Ahmad, M.U. Khandaker, N. Muhammad, F. Rehman, G. Khan, M.A. Rehman, S.M. Ahmed, M. Gulzar, A. Numan, A.S. Khan, Synthesis of multilayered hexagonal boron nitride microcrystals as a potential hydrogen storage element, Ceramics International, 43 (2017) 7358-7361. (I.F = 5.532) [2] P. Ahmad, M.U. Khandaker, S.T. Shah, F. Rehman, G. Khan, N. Muhammad, M.A. Rehman, A.S. Khan, S.M. Ahmed, M. Gulzar, A. Numan, H. Ali, Controlled synthesis of anisotropic hexagonal boron nitride nano-web, Materials Science in Semiconductor Processing, 66 (2017) 44-49. (I.F = 4.644) [3] N. Muhammad, G. Gonfa, A. Rahim, P. Ahmad, F. Iqbal, F. Sharif, A.S. Khan, F.U. Khan, Z.U.L.H. Khan, F. Rehman, I.U. Rehman, Investigation of ionic liquids as a pretreatment solvent for extraction of collagen biopolymer from waste fish scales using COSMO-RS and experiment, Journal of Molecular Liquids, 232 (2017) 258-264. (I.F = 6.633) [4] F. Rehman, L. Wang, H.-B. Jin, P. Ahmad, Y. Zhao, J.-B. Li, Dielectric relaxation and electrical properties of Sm0.5Bi4.5Ti3FeO15 ceramics, Journal of Alloys and Compounds, 709 (2017) 686-691. (I.F = 6.371) [5] G. Khan, W.J. Basirun, S.N. Kazi, P. Ahmed, L. Magaji, S.M. Ahmed, G.M. Khan, M.A. Rehman, Electrochemical investigation on the corrosion inhibition of mild steel by Quinazoline Schiff base compounds in hydrochloric acid solution, Journal of Colloid and Interface Science, 502 (2017) 134-145. (I.F = 9.965) [6] A.S. Khan, Z. Man, M.A. Bustam, G. Gonfa, F.K. Chong, Z. Ullah, A. Nasrullah, A. Sarwono, P. Ahmad, N. Muhammad, Effect of Structural Variations on the Thermophysical Properties of Protic Ionic Liquids: Insights from Experimental and Computational Studies, Journal of Chemical & Engineering Data, 62 (2017) 2993-3003. (I.F = 3.119) [7] B. Iqbal, N. Muhammad, A. Jamal, P. Ahmad, Z.U.H. Khan, A. Rahim, A.S. Khan, G. Gonfa, J. Iqbal, I.U. Rehman, An application of ionic liquid for preparation of homogeneous collagen and alginate hydrogels for skin dressing, Journal of Molecular Liquids, 243 (2017) 720-725. (I.F = 6.633) [8] M.A. Rehman, I. Yusoff, P. Ahmad, Y. Alias, Reply to comments on “CuYb0.5Fe1.5O4 nanoferrite adsorbent structural, morphological and functionalization characteristics for multiple pollutant removal by response surface methodology”, Journal of Molecular Liquids, 247 (2017) 34. (I.F = 6.633) 2016: [1] P. Ahmad, M.U. Khandaker, Y.M. Amin, N. Muhammad, Synthesis of Highly Crystalline Multilayered Boron Niride Microflakes, Scientific Reports, 6 (2016) 21403. (I.F = 4.996) [2] P. Ahmad, M.U. Khandaker, Y.M. Amin, G. Khan, S.M. Ramay, A. Mahmood, M. Amin, N. Muhammad, Catalytic growth of vertically aligned neutron sensitive 10Boron nitride nanotubes, Journal of Nanoparticle Research, 18 (2016) 1-7. (I.F = 2.533) [3] P. Ahmad, M.U. Khandaker, Y.M. Amin, N. Muhammad, G. Khan, A.S. Khan, A. Numan, M.A. Rehman, S.M. Ahmed, A. Khan, Synthesis of hexagonal boron nitride fibers within two hour annealing at 500 °C and two hour growth duration at 1000 °C, Ceramics International 42 (2016) 14661-14666. (I.F = 5.532) [4] A.S. Khan, Z. Man, M.A. Bustam, C.F. Kait, M.I. Khan, N. Muhammad, A. Nasrullah, Z. Ullah, P. Ahmad, Impact of Ball-Milling Pretreatment on Pyrolysis Behavior and Kinetics of Crystalline Cellulose, Waste and Biomass Valorization, (2016) 1-11. (I.F = 3.449) [5] A.S. Khan, Z. Man, M.A. Bustam, C.F. Kait, Z. Ullah, A. Nasrullah, M.I. Khan, G. Gonfa, P. Ahmad, N. Muhammad, Kinetics and thermodynamic parameters of ionic liquid pretreated rubber wood biomass, Journal of Molecular Liquids, 223 (2016) 754 - 762. (I.F = 6.633) [6] M.A. Rehman, I. Yusoff, P. Ahmad, Y. Alias, CuYb0•5Fe1.5O4 nanoferrite adsorbent structural, morphological and functionalization characteristics for multiple pollutant removal by response surface methodology, Journal of Molecular Liquids, 224, Part B (2016) 1256-1265. (I.F = 6.633) [7] N. Muhammad, Y. Gao, F. Iqbal, P. Ahmad, R. Ge, U. Nishan, A. Rahim, G. Gonfa, Z. Ullah, Extraction of biocompatible hydroxyapatite from fish scales using novel approach of ionic liquid pretreatment, Separation and Purification Technology, 161 (2016) 129-135. (I.F = 9.136) 2015: [1] P. Ahmad, M.U. Khandaker, Z.R. Khan, Y.M. Amin, Synthesis of boron nitride nanotubes via chemical vapour deposition: a comprehensive review, RSC Advances, 5 (2015) 35116-35137. (I.F = 4.036) [2] P. Ahmad, M.U. Khandaker, Y.M. Amin, Synthesis of boron nitride nanotubes by Argon supported Thermal Chemical Vapor Deposition, Physica E: Low-dimensional Systems and Nanostructures, 67 (2015) 33-37. (I.F = 3.369) [3] P. Ahmad, M.U. Khandaker, Y.M. Amin, Synthesis of highly crystalline multilayers structures of 10BNNTs as a potential neutron sensing element, Ceramics International, 41 (2015) 4544-4548. (I.F = 5.532) [4] P. Ahmad, M.U. Khandaker, Y.M. Amin, N. Muhammad, Synthesis and characterization of boron nitride microtubes, Materials Express, 5 (2015) 249-254. (I.F = 1. 111) [5] P. Ahmad, M.U. Khandaker, Y.M. Amin, A comprehensive study of boron nitride nanotubes multiple synthesis from a single precursor, Indian Journal of Physics, 89 (2015) 209-216. (I.F = 1.778) [6] P. Ahmad, M. Khandaker, Y. Amin, Simple technique to synthesise vertically aligned boron nitride nanosheets at 1200° C, Advances in Applied Ceramics, 114 (2015) 267-272. (I.F = 2.475) [7] P. Ahmad, M.U. Khandaker, Y.M. Amin, Synthesis of vertically aligned flower-like morphologies of BNNTs with the help of nucleation sites in Co–Ni alloy, Materials Science in Semiconductor Processing, 38 (2015) 113-118. (I.F = 4.644) [8] P. Ahmad, Mayeen U. Khandaker, Y. Mohd Amin, Z. Raza Khan, Influence of growth duration on size and morphology of boron nitride nanotubes grown via chemical vapor deposition technique, Journal of Physics and Chemistry of Solids, 85 (2015) 226-232. (I.F = 4.383) [9] P. Ahmad, M.U. Khandaker, Y.M. Amin, N. Muhammad, A.R. Usman, M. Amin, The effect of reaction atmosphere and growth duration on the size and morphology of boron nitride nanotubes, New Journal of Chemistry, 39 (2015) 7912-7915. (I.F = 3.925) [10] P. Ahmad, M. Uddin Khandaker, Y. Mohd Amin, M. Amin, M. Imran Irshad, I. Ud Din, Low temperature synthesis of high quality BNNTs via argon supported thermal CVD, Ceramics International, 41 (2015) 15222-15226. (I.F = 5.532) 2014: [1] P. Ahmad, M.U. Khandaker, Y.M. Amin, Effective Synthesis of Vertically Aligned Boron Nitride Nanotubes via a Simple CCVD, Materials and Manufacturing Process, 30 (2014) 706-710. (I.F = 4.783) [2] P. Ahmad, M.U. Khandaker, Y.M. Amin, Z.R. Khan, Synthesis of Boron Nitride Microtubes and Formation of Boron Nitride Nanosheets, Materials and Manufacturing Process, 30 (2014) 184-188. (I.F = 4.783) [3] P. Ahmad, M.U. Khandaker, Z.R. Khan, Y.M. Amin, A simple technique to synthesize pure and highly crystalline boron nitride nanowires, Ceramics International, 40 (2014) 14727-14732. (I.F = 5.532) (Total Impact Factor = 424.417)